HALT THE WATER SUPPLY: HOW TO SHUT OFF YOUR MAIN WATER VALVE

Halt the Water Supply: How to Shut Off Your Main Water Valve

Halt the Water Supply: How to Shut Off Your Main Water Valve

Blog Article

Show Details

Do you find yourself in search of answers concerning How to Find and Shut Off Main Water Shutoff Valve?


How to Turn Off Water To House and Prevent Damage
The most common places a water main will certainly be situated in house is in your boiler room, basement, or a removed panel in an area for your house.
When you discover the water main you will just turn the shutoff clockwise to close all the water off in your home till you have actually finished the fixing. Some houses will enjoy valve with a bar that you can pull as opposed to look to close the water off.
If you try to close the water off to your fixtures by utilizing an angle stop and that does not function you will need to shut of the water pipe to make your repair. There are likewise several other factors you may need to shut the water pipe like fixing icy pipelines, fixing leakages, changing components or faucets.
Many individuals are not conscious that they also have a water pipe shutoff right in their very own house and just call a plumber of never wind up doing the fixing till points obtain actually negative due to the fact that they simply do not know that closing the water main is truly simple.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn off the Water for Plumbing Repairs

I discovered that page on How to Turn of when scouting around the web. Sharing is good. Helping others is fun. Bless you for your time. Please check our site back soon.


Emergency action? Dial here.

Report this page